Study Guide
Read the full study guide: Complete Guide to Draft Beer Systems
Exam Focus
- Contrast refrigerated and unrefrigerated keg storage and troubleshoot no beer, foaming, flat, and cloudy beer, including high-volume series kegs.
- Read faucet behavior, flow, temperature, pressure, carbonation, keg condition, and FOB state as evidence of normal or abnormal operation.
- Use a repeatable keg-to-faucet diagnostic sequence that corrects the system cause without masking it by repeatedly changing pressure.
Two operating worlds
In refrigerated systems the standard cooler and system temperature is 38 F (3 C), which keeps beer fresh and holds carbonation at the designed pressure. In unrefrigerated systems kegs sit at cellar or ambient temperature and the beer is cooled on its way to the faucet; the cooler the storage, the slower the beer's flavor degrades. Refrigerated storage is always the best option for freshness, so unrefrigerated systems need faster keg turnover.
The four classic faults
| Fault | Common causes |
|---|---|
| No beer at the faucet | Empty gas or closed valve, empty keg, coupler not engaged, stuck check ball, frozen or obstructed line, FOB not reset, failed beer pump |
| Foaming | Warm beer at the keg or faucet, frozen or too-cold lines, kinked or wrongly sized line, pressure too high or too low, failed washers or keg seals, dirty system, gas leaks, clogged faucet vents |
| Flat beer | Applied pressure below equilibrium, warmer beer at an unchanged pressure, empty or leaking gas, residue on glassware |
| Cloudy beer | Chill haze in cold beer, old beer, yeast or sediment from an unfiltered keg, contamination from dirty lines |
A repeatable diagnostic sequence
Work from keg to glass and change one thing at a time:
- Measure liquid beer temperature in the keg and at the faucet; temperature is the most common cause of foam.
- Confirm gas supply, open valves, and a regulator pressure and gas blend that hold the beer's carbonation at its measured temperature and altitude; with blended gas the total pressure is intentionally higher than the pure-CO2 equilibrium pressure.
- Check the keg, coupler engagement, seals, and check ball.
- Check the FOB, then lines for kinks, freezing, or obstruction.
- Inspect the tower cooling and faucet, including vents and washers.
- Rule out the glass and the pour before blaming the beer.
High-volume configurations
Busy venues may connect kegs of the same beer in series, so gas pushes beer from the first keg into the next and the last keg in the chain feeds the faucet. The kegs empty in order starting from the gas end, letting one faucet pour several kegs without stopping for changeovers. Every keg in the chain must be the same product at the same temperature, and every coupler in the chain still needs cleaning on the normal schedule.
Why It Matters
- A fixed sequence finds the real cause instead of masking it with pressure changes.
- Telling flat, foamy, cloudy, and no-flow faults apart narrows the cause before any tool comes out.
- Series kegs and unrefrigerated systems carry trade-offs a professional must explain to operators.
Practical Sensory Exercises
Fault drill
With a manager's permission, observe or simulate each classic fault on a training system (a closed gas valve, a warm keg, a kinked jumper, a cold-hazed beer). For each, record the first symptom you saw, the step in the diagnostic sequence that found it, and the correction.
Key Terms
- Equilibrium pressure
- The applied pressure that keeps a beer's carbonation steady at its temperature.
- Series kegs
- Kegs of one product linked so beer passes from keg to keg and the last one feeds the faucet.
- Chill haze
- Haze from proteins and polyphenols that appears when beer is cold and clears as it warms.
- Check ball
- A ball in the coupler or keg valve that can stick and block flow.
- FOB reset
- Refilling the FOB chamber with beer after a keg change so flow resumes.
- Unrefrigerated storage
- Holding kegs at cellar or room temperature and cooling beer on the way to the faucet.
References
- Advanced Cicerone® Syllabus v6
- Advanced Cicerone® Syllabus v6 PDF
- Certified Cicerone® prerequisite: Draft System Operation
- Related Advanced Cicerone® topic: CO2 pressure and carbonation during dispense
- Related Advanced Cicerone® topic: Draft system design
- Related Advanced Cicerone® topic: Draft system maintenance